Guides Start here

How to Find Penny Items at Home Depot

  • Checked

Short answer

Only the register proves a penny: scan the barcode on the product's own package and look for $0.01. Pick items to test by an old date on the clearance tag, a big drop from the WAS price, or stock sitting where it doesn't belong. Many suspects ring up higher, and a store can still decline the sale.

The method in six steps

  1. Pick a suspect. Look for a clearance tag with an old date, a big gap from the "WAS" price, or an item that sits where it doesn't belong.
  2. Check one or two more signals. One odd thing proves nothing. Two or three on the same item make it worth a scan.
  3. Use the Home Depot app as a filter. It can tell you where an item lives and whether stock exists. Shopper guides say it rarely shows a penny price.
  4. Scan the package, not the tag. Take one unit to self-checkout and scan the UPC, the barcode printed on the product's own box.
  5. Read the screen. $0.01 means it rang up as a penny. Any other price is that store's real price today. Put it back.
  6. Be polite at the register. A store can pull the item or decline the sale. Arguing won't change that.

Read the clearance tag

A SKU is the store's item number. When Home Depot clears out a SKU, shoppers report that it gets a clearance tag, usually yellow, and its price steps down over weeks.

PennyCentral's guide says a real clearance tag carries two marks a promotional label doesn't: a date and a "WAS" price. Yellow alone proves nothing: promotional labels can be printed on yellow stock, and clearance tags sometimes print on white.

Read the tag in the order PennyCentral's guide trusts it:

  1. The date. An older date usually means the item has been on clearance longer.
  2. The gap from the WAS price. A bigger gap usually means a deeper markdown.
  3. The price ending, last.

Price endings are disputed: older guides read .06 or .03 as steps toward a penny, and PennyCentral's August 2026 guide says that ladder "is broken". Treat an ending as a weak hint at most; the full dispute is in Home Depot Clearance Tags and Price Endings. And a price ending in .01, like $61.01, is not a penny. A penny item rings up at $0.01 total.

Spot stock the store missed

Guides describe penny items as things the store meant to pull from the floor and missed. So the signals are about neglect:

  • Very few units where there should be many.
  • An item away from its normal shelf spot, or on a high overhead shelf.
  • Older packaging next to a newer version of the same product.
  • A clearance sticker nearby, at any price.

PennyCentral's guide says many stores have moved clearance out of dedicated end-of-aisle displays. Check the normal aisle, not just a clearance corner.

Use the app as a filter

Shopper guides say the Home Depot app shows the aisle, the bay and a stock count for your store, but rarely a penny price. Deal Soldier's guide says a penny SKU "usually shows as unavailable, out of stock, or full retail in the Home Depot app." Use it to decide what to look at, then go look. What each screen in the app can mean: Home Depot Clearance App: What It Shows.

Scan the product's own barcode

Both PennyCentral and Scavenger tell shoppers to scan the UPC at self-checkout, not the barcode on the yellow shelf tag.

  • Match the item first. Scavenger's help page says the most common miss is a tag that has moved: the description and SKU on the tag must match the item in your hand.
  • One unit only. Take one to self-checkout. If it rings up at $0.01, buy that one first.
  • Boxes with several barcodes. PennyCentral's guide says to compare the digits under each barcode with the UPC listed in the app; only one will match.
  • In-aisle price scanners. PennyCentral says they are common in a few states with price-check laws and rare elsewhere. A scanner reading is the same kind of check as the register.

Any other price is the item's real price at that store today. A list from another state doesn't change it: Scavenger's help page notes that "penny timing is per store."

At the register

A $0.01 register price is not a promise of a sale. SlashGear (updated November 18, 2026) reports the company has no "publicly-posted guidance" on what should happen when a customer rings one up, and that stores vary.

  • The register can block some items. PennyCentral describes a "stop sale" screen that returns no price at all. That is different from a penny.
  • Staff decide. If a cashier or manager declines, say thanks and leave it.
  • Keep your receipt for anything you buy.

The outcomes shoppers report, from a clean sale to a refusal: Can You Buy Penny Items at Home Depot?

Four ways a trip ends

What happensWhat to do
You scan five suspects and none rings up at $0.01Expect trips like this. Note the dates and prices; check again on a later trip.
An item rings up at a deep clearance price, not a pennyThat may still be a good buy. Decide on the price in front of you.
An item rings up at $0.01Buy that unit. If more are on the shelf, guides say to buy them in a normal transaction and accept a no if staff step in.
A list or app said an item was a penny, but it rings up full priceThe list was a guess, or it came from another store. See Are Home Depot Penny Items Real?

Where penny leads come from

Shoppers trade leads in free Facebook groups, on shopper-report sites, and in paid apps and communities that claim to predict pennies from store data. Each one is a lead, not a confirmation. Their prices, data and fine print are in Penny Finder Apps Compared.

What this guide can't tell you

  • We have no live store data. Prices and stock change by store and by day.
  • A penny flag is a guess. A store can pull an item or refuse the sale.
  • We have not shopped these stores ourselves. The steps come from public penny-shopper guides and news reports, named in the sources.
  • We have not opened the Home Depot app for this page. What it shows comes from shopper guides, and Home Depot can change the app at any time.
  • Markdown timing differs by store and department. Nobody outside the store can tell you the day an item will drop to a penny.

Questions

Does the Home Depot app show penny prices?

Shopper guides say it usually does not. PennyCentral calls the app 'not a real-time source of penny status'; it can still help with the aisle, the bay and whether stock exists.

What barcode do you scan for a Home Depot penny item?

The UPC, the barcode printed on the product's own package. Guides warn that the barcode on the yellow clearance tag belongs to the shelf tag, not the product.

Do price endings like .06 or .03 tell you when an item will hit a penny?

Guides disagree. Some still read .06 as an early markdown and .03 or .02 as a deeper one, while PennyCentral's guide says that ladder stopped working in 2026 and the tag's date tells you more.

What day does Home Depot mark items down to a penny?

There is no published schedule. Guides say each store runs its own clearance, so the same item can be a penny at one store and full price a few miles away.

What if the cashier says no?

Accept it politely and move on. Guides and news reports agree that what happens at the register varies by store, and a register price of $0.01 does not oblige the store to sell.

Sources